A neighbor gave me a working Alley Hoops Skee-ball machine. It had an issue with the scoring display (not all segments illuminating) and the ball release solenoid. I found a fuse directly under the ball release harness connection on the controller that had blown. I replaced it and the ball release works.

I noticed while examining the display (which has three digits on the left and the ball count on the right) that when I wiggled the connector, all segments worked fine. I am planning on checking for cold solder joints and possibly directly soldering the wires from the harness to the board. I have checked with the diagnostics and everything seems to be working. The flasher, all optical switches and ball release mechanism can be triggered through diagnostics.

How do I assemble the home version? Green Day American Idiot Download Zippy. It is a 2 hoop home version of the Arcade Alley electronic double hoop to hoop - Arcade Alley Alley. Find a manual there. Arcade alley hoop to hoop assembly instructions assembly instructions - Arcade Alley Alley Electronic Double question. I couldn't find a manual or instruction.

When I reset the machine, I found that the machine will release the balls, but when I roll them, it does not score anymore. It was working fine before and I am stumped. Does anyone have any type of schematics for this machine. I honestly don't know how old, what 'model' (S,H, etc) it is, or how much it is worth.

Any suggestions would be greatly appreciated!! I don't have any schematics but I'd say as far as the score display goes, if they segments are separate bulbs in sockets like skee balls are, they sockets flex & the solder joint breaks. Also if the fuse for the ball release solenoid blows often, the solenoid may be getting hung up which I find to be very common. Centaur Normal Font Download Free. Who makes the machine? If they're still in business maybe you can get schematics from them, otherwise you may try either Betson or Weiner Distributing. Edit: duh, I see Skeeball makes it.

See if they will give you the manual. I was tinkering with the Skeeball game and wanted to update the status. Budidaya Rumput Laut Pdf Files. When I place my hand in front of any of the sensors, there is a corresponding led that illuminates on the small circuit board near the display. They are triggering, but it will not keep score.

When I start the game by pressing the button, the game seems to go into 'play' mode but rolling the balls or triggering the sensors by hand has no effect. I had originally planned on putting the game in my mother-in-laws game room but it is too tall. I am either going to sell it or part it out. There are around ten extra sensors in a bag in the machine that all work.Any ideas of what the parts are worth? I would love to get it working again and sell it whole. I hope the main board was not damaged when I replaced the fuse for the ball release actuator.